Wuhan Unique Mechanical And Electrical Equipment Co.,LTD.
Wuhan Unique Mechanical And Electrical Equipment Co., LTD.
Add to Cart
Eltek Flatpack2 Rectifier Module 110V 2000W HE WOR 241119.805
Overview
High efficiency and reliable rectifiers
The most efficient power conversion module in the industry! Since the launch the Flatpack 2 family has expanded into a wide selection of power ratings and voltages
Key Feature
Proven Reliability
High Power Density
Application Flexibility, 2kw - 2m
Accepts Dc Input (Dc/ Dc Converter)
Global Compliance (Ce, Ul, Nebs)
Marine & Offshore Certification
Patented Technology
Digital Controllers
Applications
Power Utilities
Switch Tripping
Control & Protection Systems
Emergency Lighting
Railway Infrastructure
Converter Stations
Power Stations
Various other applications in demanding industries like marine, oil & gas, process etc.
Specifications
| Part number | 241119.805 |
| Model | 110-120 / 20A HE |
| INPUT DATA | |
| Voltage range (nominal) | 176 - 277 V AC 1) |
| Voltage range | 85 - 305 V A 1) C |
| Frequency | 45 - 66 Hz |
| Maximum current | 18.64 ARMS |
| Power Factor | 0.99 (@ 50-100 % load) |
| THD (@ 230 VAC) | < 4 % (@ full load) |
| Protection | Varistor for transient protection, fuse in both lines, shutdown above 300/ 305 V |
| OUTPUT DATA | |
| Default voltage | 122.5 V DC |
| Voltage range | 90.02) - 151.25 V DC 1) |
| # Pb cell supported (1.8 - 2.4 V DC/ cell) | 54 -60 |
| # NiCad cell supported (1.05 - 1.65 V DC/ cell) | 86 - 91 |
| Max power, nominal input | 3025 W1) |
| Max power, 85V input | 1280 W |
| Max current | 20 A |
| Hold-up time, default voltage and 1500 W load | 10 ms, VOUT > 99.7 VDC |
| Current sharing | ±5% of maximum current from 10 to 100% load |
| Static voltage regulation | ±0.5% from 10% to 100% load and nominal input |
| Dynamic voltage regulation | ±5.0% for 10-80% or 80-10% load variation, regulation time < 50ms |
| Rippel and noise, 30 MHz bandwidth | < 500 mV PP |
| Protection | Overvoltage shutdown, short circuit proof, high temperature, hot plug -in inrush current limiting, ORing diode |
| OTHER SPECIFICATIONS | |
| Efficiency | > 94% |
| Isolation | 3.0 kVAC – input and output, 1.5 kV AC – input earth, 1.5 kV DC – output earth 3 kVAC CAN – input, 3kVAC CAN – output |
| Alarms (Red LED) | Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure |
| Warnings (Yellow LED) | Rectifier in power derate mode, Remote battery current limit activated, Input voltage out of range, flashing at overvoltage |
| Normal (Green LED) | Input and output ok |
| MTBF (Telcordia SR-332 Issue I method III (a)) | >400 000h (@T AMBIENT= 25°C) |
| Operating temperature (5 - 95% RH non-cond.) Output power de-rates above temp / to | -40 to +75°C [ -40 to +167°F] +50°C / 1150 W @ +75°C |
| Storage temperature | -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing |
| Dimensions[WxHxD] / Weight | 109 x 41.5 x 327mm (WxHxD) [4.25 x 1.69 x 13”] / 1.950 kg [4.3lbs] |
| DESIGN STANDARDS | |
| Electrical safety | UL 60950 -1, EN 60950 -1, CSA 22.2 |
| EMC | ETSI EN 300 386 V.1.3.2 EN 61000-6-1 / -2 / -3 / -4 / -5 |
| Mains Harmonics | EN 61000 -3-2 |
| Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) ETSI EN 300 132-2 2011/ 65/ EU (RoHS) & 2008/ 98/EC (WEEE) |
| Marine compliance (EMC class B with AC filter) |
- |
Specification valid for HW version 2 and newer. For older revision see DS:24111x.805.DS3 ver1.
Output voltage will increase at light loads (< 1.6A)
2U FLATPACK2 BULK OUTPUT RACK WITH EARTH FAULT DETECTION
IBB SYSTEM IN FPC CABINET
AVAILABLE CURRENT AT NOMINAL INPUT 24111x.805